1600 Gallon Conquest Sprayer

• 1600 Gallon polyethylene spray solution tank has a 4" bottom slope, baffle, high volume jet agitation system and a large sump area providing total drainage.
• New axle configuration allows infinite wheel spacing
• 320 / 90R46 radial tires for dual wheel application or 14.9 x 46 12 ply radial tires for single wheel application tires give sprayer a smooth ride and minimize field compaction.
• Flanged fittings provide leak free plumbing system
• Valves are marked and conveniently located for easy access.
• Raven 4400 sprayer control with motorized ball valvves executes precise chemical application.
• Parallel linkage height-adjust system with a nitrogen charged accumulator softens the boom ride. Boom height adjusts from 20" to 67".
• Pendant grip control requires only 1 tractor remote outlet.
• Hitch pin to axle length is 16' 10"
• 120' boom transport width is 12'
• Transport height is 11' 2".
• Overall length in transport position is 28' 1".
• 2 1/2 gallon clean water tank is conveniently mounted on the sprayer.
• Quick fil with standard 3" quick couplers (optional)
• The 60', 90' or 120' multi-width spray boom demands precision laser cut tubing and trusses. Its superior strength and clean design deliver a smooth and consistent in-field ride. Boom can be folderd to spray in a 60', 90' or an unfolded 120' width.

Hydraulics Notes: Tractor must be equipped with closed center hydraulic system. 2700 PSI is required to operate boom efficiently.

• 1600 Gallon polyethylene spray solution tank has a 4" bottom slope, baffle, high volume jet agitation system and a large sump area providing total drainage.
• New axle configuration allows infinite wheel spacing
• 320 / 90R46 radial tires for dual wheel application or 14.9 x 46 12 ply radial tires for single wheel application tires give sprayer a smooth ride and minimize field compaction.
• Flanged fittings provide leak free plumbing system
• Valves are marked and conveniently located for easy access.
• TeeJet 844E or Raven 450 sprayer control with motorized ball valvves executes precise chemical application.
• Valves are marked and conveniently located for easy access.
• Hydraulic driven centrifugal pumps.
• Optional high pressure pump for spraying pressure up to 180 PSI.
• 160 gallon rinse and flush tank gives the system a thorough clean out.
• Pendant grip control requires only 1 tractor remote outlet.
• 2 1/2 gallon clean water tank is conveniently mounted on the sprayer.
• The Hydraulic 60', 80/90' front fold boom's outer extesions can be removed for 80' spraying. When partially folded, the boom can spray a 60' width. Fully unfolded, the spray width is 80/90'. This boom features
  a nitrogen charged accumulator system combined with hydraulic
  leveling linkage to soften the ride. Only one set of remote outlets is
  required. Boom folds to a transport width of 12'.
  Recommended 88" minimum wheel spacing.
  Boom warranty is void on units with wheel spacing less than 88".
• Booms feature indepentent wing fold, hydraulic height adjust,
  wing leveling and outer wing breakaway.
• Booms are available with 3/4" high volume plumbing and TeeJet® diaphragm check nozzles spaced at 20".
• All booms have stainless steel boom and hose clamps.
• 80 mesh feeder line filters eliminate the need for tip screens.
• Light system consists of flasher/turn signal and taillights for added road safety.
• 33 gallon high volume foam marker (optional).
• Quick fill with standard 3" quick couplers (optional).